CDA RC 9000 Users operating instructions Instruções de Operação descarregar pdf (Página 38)

Fig. 44b

Injectors replacement of

top burners

Every cooker is provided with a set of injec-

tors for the various types of gas.

Injectors not supplied can be obtained

from the After-Sales Service.

Select the injectors to be replaced accord-

ing to the table at page 39.

The nozzle diameters, expressed in hun-

dredths of a millimetre, are marked on the

body of each injector.

To replace the injectors proceed as follows:

– Remove the grids and extract the burner

bodies.

– Using a wrench, substitute the nozzle

injectors “J” (Figs. 44a - 44b) with those

most suitable for the kind of gas for

which it is to be used (see “Table for the

choice of the injectors”).

The burners are constructed in such a

way so as not to require the regula-

tion of the primary air.

Adjusting of the minimum

of the top burners

Considering that in the minimum position

the flame must have a length of about 4

mm and must remain lit even with a quick

turn from the maximum position to that of

minimum.

The flame adjustment is done in the follow-

ing way:

– Turn on the burner

– Turn the tap to the MINIMUM position

– Take off the knob

– With a small flat screwdriver turn the

screw inside the tap rod to the correct

regulation (fig. 45).

Normally for LPG, tighten up the regu-

lation screw.

Fig. 45

Fig. 44a

Conversion to Natural Gas or to LPG

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Comentários a estes Manuais

Sem comentários

CDA RC 9000 Users operating instructions Instruções de Operação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões CDA RC 9000 Users operating instructions