CDA HVG66 Manual de Serviço

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01

10TIPS FOR INSTALLATIONLocation – The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space contain

11InstallationTechnical Information For The InstallerIn order to install the cooktop into the kitchen xture, a hole with the dimensions shown in g.

12Installing the Separator Below the Base of the CooktopIt is recommended that a 30mm clearance be left between to base of the cooktop and the separat

13Fastening the CooktopEach cooktop is provided with an installation kit including brackets and screws for fastening the co-oktop to benches from 30 t

14Gas Supply RequirementsImportant NoteThis appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on the applia

15Gas ConnectionThe installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably quali-ed and registered installer. I

16Gas Connection GB Cat: II 2H3+The tting (g. 20) is made up of: – 1 nut “A” – 1 elbow tting “C” – gasket “F”Connection to the Gas Supply• Be car

17Conversion to Natural Gas or to LPGReplacing the Burner InjectorsIf the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit c

18Table for the Choice of the Injectors GB Cat: II 2H3+BurnersNominalPowerkWRe

19Mains Electricity ConnectionIncorrect installation may be dangerous and the manufacturer can not be held responsible.Warning! This appliance must b

2ImportantThis appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic app

Appliance ServicingCDA provide a quality and eective after-sales service to cover all your servicing needs.Please attach your receipt to this page fo

3Important Safeguards and Recommendations – Do not carry out any cleaning or maintenance without rst disconnecting the appliance from the electrical

4Features and Technical Data456 71 223Cooking Points1. Auxiliary burner (A) 1,00 kW2. Semi-rapid burner (SR) 1,75 kW3. Rapid burner (R) 3,00

5How to Use the HobGas BurnersGas ow to the burners is adjusted by turning the knobs (illustrated in g. 2) which control the valves.Turning the knob

6Choice of BurnerThe symbols printed on the panel by the side of the knob indicate which burner you are controlling.Choose a suitable burner depending

7Cleaning and MaintenanceGeneral Tips – Before cleaning the hob switch it o and wait for it to cool down. – Clean with a cloth, hot water and soap or

8Burners and Grids – These parts can be removed and cleaned with appropriate products. – After cleaning, the burners and their ame spreaders must be

9FCFlame failureprobe “T”Ignitor “ S”Correct Positioning of the Auxiliary, Semi-rapid and Rapid Burners – It is very important to check that the burne