CDA HG3602 Manual de Serviço

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

10Cleaning and MaintenanceGeneral Tips– Before cleaning the hob switch it off and wait for it to cool down.– Clean with a cloth, hot water and soap or

11Burners and Grids– These parts can be removed and cleaned with appropriate products.– After cleaning, the burners and their flame spreaders must be w

12Correct Position of Triple Ring BurnerThe triple ring burner must be correctly positioned (see fig. 9); the burner ribs must be fitted in their housin

13Correct Positioning of the Semi-rapid and Rapid Burners– It is very important to check that the burner flame spreader F and the cap C have been corr

14TIPS FOR INSTALLATIONLocation– The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space contain

1530 mmSpace for connectionsClearanceSeparatorInstallationTechnical Information for the InstallerIn order to install the hob into the kitchen fixture,

163 cmmin3 cm4 cmSARFastening the CooktopEach cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to

17Gas Supply RequirementsImportant Note This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on the appli

18Gas ConnectionThe installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably qualified and regist

19Gas connection Cat: II 2H3+The fitting (fig. 21) is made up of:– 1 nut A– 1 elbow fitting C– gasket FConnection to the Gas Supply– Be careful wh

2ImportantThis appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domest

20JJConversion to Natural Gas or LPGReplacing the Burner InjectorsIf the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit ca

21Regulating the Burner Minimum Setting When changing from one type of gas to another, the minimum tap output must also be correct, considering that i

22Mains Electricity ConnectionIncorrect installation may be dangerous and the manufacturer can not be held responsible.Warning! This appliance must be

23Appliance ServicingCDA provide a quality and effective after-sales service to cover all your servicing needs. Please attach your receipt to this pag

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

3Important Safeguards and Recommendations– Do not carry out any cleaning or maintenance without first disconnecting the appliance from t

4Features and Technical DataCooking Points1. Triple ring burner (TR) - 3,50 kW 2. Rapid burner (R) - 3,00 kW3. Semi-rapid burner (SR) - 1,75 kWCo

5How to Use the HobGas Burners Gas flow to the burners is adjusted by turning the knobs (illustrated in fig.2) which control the valves.Turning the kn

6Lighting Gas BurnersIn order to light the burner, you must:1 – Press in the corresponding knob and turn counter-clockwise (fig. 3) to the full flame

7Choice of Burner The symbols printed on the panel by the side of the knob indicate which burner you are controlling.Choose a suitable burner dependin

8Correct use of Triple-Ring BurnerThe flat-bottomed pans are to be placed directly onto the pan-support.To use the WOK you need to place the proper sta

9Fig. 6Fig. 7