CDA hc9620 Manual descarregar pdf (Página 21)

How to Install the Hob

How to install the hob:

Overall dimensions of the hob: width 900mm depth 520mm

Worktop cut-out dimensions: width 870mm depth 490mm

1. Make the required hole in the

worktop. Before doing this, you must

check the instructions supplied with

any cooker hood to ensure that you

will have the required clearance. The

cut-out (Fig. 4) shows a 60mm gap

from the wall to the cut-out edge.

This makes the distance from the

hob, when ﬁted, to the back wall

50mm. If a splashback/worktop

upstand is to be ﬁtted, take this

into account when cutting the hole.

The minimum distance that the hob

should be positioned away from the

rear wall or splashback is 50mm.

2. Position the hob seal, as shown in

Fig. 6, ensuring that the ends meet

without overlapping. Do not use

silicone type sealant.

Fig. 5

400mm

650mm

Fig. 6

60mm

490mm

870mm

190mm 190mm

Fig.4

1 2 ... 16 17 18 19 20 21 22 23 24

Sem comentários

CDA hc9620 Manual Página 21