Cda HCG 731 Manual do Utilizador descarregar pdf (Página 13)

Installation

Technical Information for the Installer

In order to install the hob into the kitchen ﬁxture, a hole with the dimensions shown in ﬁg. 12 has to be

made, bearing in mind the following:

– Within the unit, between the bottom of the hob and the upper surface of a shelf there must be a

clearance of at least 30mm.

– It is absolutely essential that you place a separator between the base of the hob and the built-in unit or

the oven.

– The hob must be kept no less than 200mm away from any side wall (ﬁg. 12).

– The hob must be installed at least 60mm from the wall.

– There must be a distance of at least

650mm between the hob and any

wall cupboard or extractor hood

positioned immediately above (see

ﬁg. 14).

– If the hob is installed over a built-

in oven, there must be a distance

of at least 30mm between the two

appliances. The two appliances should

be connected to the gas supply with

independent connections

650 mm

450 mm

480

–2

560

200

–2

680

500

Installation in Kitchen Cabinet with Door

It is recommended that a 30mm clearance be left

between the cooktop and the ﬁxture surface (ﬁg. 13).

30 mm

Space for

connections

Clearance

Door

Fig. 12

Fig. 14Fig. 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Cda HCG 731 Manual do Utilizador Página 13