CDA HVC60SS Instruções de Utilização descarregar pdf (Página 21)

CONNECTING THE FEEDER CABLE

To connect the feeder cable to the hob it is necessary to carry out the following opera-

tions:

• Unscrew the screw A of the terminal board at the bottom of the hob (fig. 4.4).

• Unlock the 2 clips B and open the cover C.

• Unscrew the screw D and open completely the cable clamp E (figs. 4.6 - 4.7 - 4.8).

• Position the U bolts F onto terminal board G (figs. 4.6 - 4.7 - 4.8) according to the

diagrams in fig. 4.5.

• Connect the phase and earth wires to terminal board G according to the diagrams in

fig. 4.5.

• Strain the feeder cable and block it with cable clamp E (by screwing screw D).

• Close the cover C of the terminal board G and block it with the screw A.

FEEDER CABLE SECTION

“Type H05VV-F or H05V2V2-F or H05RR-F”

For 60 cm and 80 cm models:

220-240 V

~ 3 x 2.5 mm

(**)

380-415 V 3N

~ 5 x 1.5 mm

(**)

380-415 V 2N

~ 4 x 2.5 mm

(**)

For 90 cm models:

220-240 V

~ 3 x 4 mm

(**)

380-415 V 2N

~ 4 x 2,5 mm

(**)

380-415 V 3N

~ 5 x 2.5 mm

(**)

Fig. 4.4

(**)

Connection with wall box connection.

– Diversity factor applied

– A diversity factor may be applied to

the total loading of the appliance only

by a suitably qualified person.

1 2 ... 16 17 18 19 20 21 22 23 24

Sem comentários

CDA HVC60SS Instruções de Utilização Página 21