CDA HVN 32 Manual de Serviço descarregar pdf (Página 10)

Afterheat in Cooking Zone/s

When switching off a cooking zone (power level 0 ), if

the temperature of the zone is too warm to be touched

the display will show alternately "

H " and " 0 ".

Whenever the touch control is switched off, the residual

heat is shown by a static " H ".

Avoid touching the hob surface over the cooking area.

Please pay special attention to children.

It is still possible to start cooking again; just set the

required power level.

H " is turned OFF when the cooking zone temperature

drops below a preset temperature.

Cooking zone

power level

Front zone

Watt power

Rear zone

Watt power

75 W 100 W

150 W 200 W

300 W 300 W

400 W 500 W

500 W 700 W

600 W 900 W

800 W 1100 W

1000 W 1600 W

1400 W 2200 W

Power Ignition and Adjustment of a Cooking Zone

To turn ON a cooking zone the touch control must be

switched ON (see section “

How To Turn the Touch Control

ON and OFF

”).

Press the key

and keep it pressed until the desired power

level, ranging between 1 and 9 is set.

As an alternative, press the key . The choice starts from

level 9 (maximum level) down to 1 (minimum level).

To reset the power level press the key and keep it pressed

until power level zero ( 0 ) or alternatively press the keys

and at the same time.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sem comentários

CDA HVN 32 Manual de Serviço Página 10