Cda RC 9000 Manual do Utilizador descarregar pdf (Página 39)

Adjusting of the minimum of the top burners

Considering that in the minimum position the flame must have a length of about 4 mm

and must remain lit even with a quick turn from the maximum position to that of

minimum.

The flame adjustment is done in the following way:

– Turn on the burner

– Tum the tap to the MINIMUM position

– Take off the knob

– With a small flat screwdriver turn the screw inside the tap rod to the correct

regulation (fig. 40).

Normally for LPG, tighten up the regulation screw.

Fig. 40

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Sem comentários

Cda RC 9000 Manual do Utilizador Página 39