CDA RC 9621 Series Manual de Serviço descarregar pdf (Página 35)

ANTI-TILT BRACKET

Important!

To restrain the appliance and prevent it tipping accidentally, t a bracket to its rear to x it

securely to the wall.

To t the anti-tilt bracket:

1. After you have located where the cooker is to be positioned, mark on the wall the place where the two

screws of the anti-tilt bracket have to be tted.

 Please follow the indications given in g. 38.

2. Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.

 Important!

 Before drilling the holes, check that you will not damage any pipes or electrical wires.

3. Loosely attach the anti-tilt bracket with the two screws supplied.

4. Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in the slot

on the cooker’s back, as shown in g. 38.

5. Tighten the screws attaching the anti-tilt bracket.

6. Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot on the cooker’s

back.

Fig. 38

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

CDA RC 9621 Series Manual de Serviço Página 35