CDA SC220SS Especificações descarregar pdf (Página 21)

21

Models with tilting grill and sliding

shelves

– Assemble the sliding shelves on the

oven walls using the 2 screws (Fig.

9.6).

– In the models with catalytic panels

interpose the catalytic panels “A” with

the arrow up (Fig. 9.6).

– Position the shelf and tray on the slid-

ing shelves (fig. 9.7).

To dismantle, operate as follows:

– Unscrewing the fixing screws and

slide off the sliding shelves and the

catalytic liners (if supplied) to the oven

wall as in fig. 9.6.

The grill is secured to the rear wall of

the oven on a hinge system that

allows it to be lowered to allow proper

access when cleaning the oven ceiling

(fig. 9.5).

Fig. 9.5

Models with tilting grill and wire

racks

– Assemble the wire racks on the oven

walls using the 2 screws (Fig. 9.4).

– In the models with catalytic panels

interpose the catalytic panels “A” with

the arrow up (Fig. 9.4).

– Slide in, on the guides, the shelf and

the tray (fig. 9.3).

The rack must be fitted so that the

safety catch, which stops it sliding out,

faces the inside of the oven.

To dismantle, operate as follows:

– Unscrewing the fixing screws and

slide off the wire racks and the cat-

alytic liners (if supplied) to the oven

wall as in fig. 9.4.

The grill is secured to the rear wall of

the oven on a hinge system that

allows it to be lowered to allow proper

access when cleaning the oven ceiling

(fig. 9.5).

Fig. 9.4

A A

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentários a estes Manuais

Sem comentários