CDA sk400 Especificações

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 003 E : cu

10While the “Function Selection Indicator” is showing on the display, the cooking functions are selected by using the “Function Down” and “Function Up

11 Half Grill - Grill pan position 1, 2 or 3 - Default 180°C This grill function is the same as the full grill, but only uses the centre of

12 Fan Cooking With Lower Heat - Shelf position 3 or 4 - Default 180°C This programme uses the fan element to supplement the heat from the

13 Conventional Oven - Shelf position 4 or 5 - Default 180°C This function uses the upper and lower heating elements. Natural convec

14Auto Cut-O FeatureThere is an auto cut-o feature on all cooking functions for added safety. Whenever the oven is running it will automatically sw

15Key lock after power outageThe key lock can be set to do one of two things after the power to the oven is cut then re-instated:- •Key lock aut

16Programming the OvenMemory FunctionThe memory function can be used to save a setting that you frequently use.To save a setting into memory•Select

17The minute minderThe minute minder can be used when the oven is switched on or o. It can be set for up to 23 hours and 55 minutes.To set the minut

18•While the “Cooking Time” symbol is still flashing, use the “+” or “-” keys to scroll the display to the required cooking time.•After approx.

19Please note: At the end of the cooking programme, remember to turn o the oven manually. Setting the clock display illuminationThe display for the c

2ImportantThis appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may

20Care and MaintenanceIMPORTANT• Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power sup

21Suitable proprietary chemical cleaners may be used after first consulting with the manufacturer’s recommendations and testing a sample on a small are

22Oven DoorRemoving the Oven DoorThe oven door can easily be removed as follows:• Open the door to the full extent (Fig. 5).• Open the lever “A”

23Changing the bulb - Lateral lights (Figs 10 & 11)•Removeallshelvesandthegrillpanfromtheoven.•Gentlyunclipthesiderackfromitsl

24Changing the bulb - Back light (Fig. 12)Unscrew the protective cover. We recommend that you wash and dry the glass cover at this point.Carefully re

25Installation ImportantIf the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not

264056060060056056459559554755420 Fig. 13Dimensions Oven HousingHeight (mm) 595 600Width (mm) 595 560Depth (mm) 567 560 (min)housing s

27Electricity Supply to Your OvenWarning! this appliance must be earthed.This appliance must be connected by a competent person, using fixed wiring via

Please contact our Customer Care Department for Service on the details belowCustomer Care Department • The Group Ltd. • Harby Road • Langar •

3CE Declarations of Conformity:This oven has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/E

4Important•Read the user instructions carefully before using the oven for the first time.•Follow the instructions for first use of the oven.• Clea

5Before First UseFirst use• The decorative metal finish of this appliance has been coated with a preservative to protect it during transport and stor

6Please note:• This oven has been fitted with a cooling fan to achieve maximum eciency and to maintain low surface temperatures. The cooling fan wi

7Control Panel A B C D E F G H I J

8Using the Touch ControlsThe touch controls should be used with the flat of your finger, rather than the fingertip.Internal shelf positionsThe shelves an

9Oven Controls and UseTo turn the oven on If the clock display is flashing, either set the clock or wait for approx. 5 seconds until it stops flashing.T