CDA FF820 Manual descarregar pdf (Página 7)

high humidity indicator will show on the display and the fridge will

beep twice to conﬁrm the setting. To switch the high humidity function

o, press and hold the high humidity key for three seconds. The

high humidity indicator on the display will switch o and the fridge will

beep twice to conﬁrm the setting.

Please note:

The temperature will show on the display for 30 seconds after the

door has been opened, or a key has been pressed on the control

panel before switching o automatically. To switch the display on,

press any key.

In the event of a power failure, the fridge temperature settings will be

restored to the programmed levels when the power returns.

Over temperature alarm

The fridge is equipped with an over temperature alarm to warn when

the termperature in the fridge has been over 15° for six hours or

more. The fridge will beep ten times every thirty minutes until the

fridge temperature is below 10°, and the fault code E9 will show on

the display. Press any key to switch the alarm o. E9 will continue to

show on the display until the fault is resolved.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sem comentários

CDA FF820 Manual Página 7