CDA HVC75SS Instruções de Utilização descarregar pdf (Página 33)

CONNECTING THE FEEDER CABLE

To connect the feeder cable to the hob it is necessary to carry out the following opera-

tions:

• Unscrew the screw A of the terminal board at the bottom of the hob (fig. 6.1).

• Unlock the 2 clips B and open the cover C.

• Unscrew the screw D and open completely the cable clamp E (fig. 6.3).

• Position the U bolts F onto terminal board G (fig. 6.3) according to the diagram in fig. 6.2.

• Connect the phase and earth wires to terminal board G according to the diagram in

fig. 6.2 and 6.3.

• Strain the feeder cable and block it with cable clamp E (by screwing screw D).

• Close the cover C of the terminal board G and block it with the screw A.

FEEDER CABLE SECTION

“Type H05VV-F or H05V2V2-F or H05RR-F”

Connection with wall box connection

220-240 V

~ 3 x 2,5 mm

(**)

(**) Connection with wall box connection.

– Diversity factor applied

– A diversity factor may be applied to the total loading of the appliance only by a suit-

ably qualified person.

Fig. 6.3

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

CDA HVC75SS Instruções de Utilização Página 33