CDA CST Manual do Utilizador descarregar pdf (Página 4)

Care and Maintenance

IMPORTANT : DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRACTOR WITHOUT FIRST

SWITCHING OFF THE ELECTRICITY SUPPLY.

Cleaning

You should use a nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch the surface and could erase the

control panel markings.

You can clean your extractor effectively by simply using a dilute solution of water and mild detergent and drying to a

shine with a clean cloth, for example the CDA E-Cloth.

Cleaning the grease ﬁlter

The grease ﬁlter should be kept clean to minimise the risk of ﬁre.

At least once a month you should remove and clean the grease ﬁlter with hot soapy water. You can also wash the

grease ﬁlter in a dishwasher, ensuring that you place it in an upright position to prevent damage from other items in

the dishwasher. After rinsing and drying, replace the ﬁlter.

To remove the grease ﬁlter, ﬁrst open the grease ﬁlter cover by sliding the retaining clips across. Then remove the ﬁlter

clips (shown as B in ﬁgure 2) before removing the grease ﬁlter itself (shown as D in ﬁgure 2). To replace the grease

ﬁlter, repeat the steps in reverse.

Please note:

Cleaning the ﬁlter in the dishwasher may lead to discoloration. This is normal and does not constitute a fault with the

appliance.

Changing the charcoal ﬁlter (re-circulating only)

To ensure best performance of your extractor, you should replace the charcoal ﬁlters every four to six months,

depending on use. To attach a new charcoal ﬁlter, ﬁrst open the grease ﬁlter cover as described above. Then offer up

the charcoal ﬁlter (shown as C in ﬁg 2) to the base of the motor and turn it clockwise until it locks into place.

Fig. 2

1 2 3 4 5 6 7 8 9 10

Sem comentários

CDA CST Manual do Utilizador Página 4