CDA HG9320 Manual de Serviço descarregar pdf (Página 8)

Fig. 8

Burners and Grids

– These parts can be removed and cleaned with appropriate products.

– After cleaning, the burners and their ﬂame spreaders must be well dried and correctly replaced.

– It is very important to check that the burner ﬂame spreader and the cap have been correctly positioned.

Failure to do so can cause serious problems.

– Check that the electrode “S” (ﬁgs. 7-9) is always clean to ensure trouble-free sparking.

– Check that the sensor “T” (ﬁgs. 7-9) next to each burner is always clean to ensure correct operation of

the safety valves.

– Both the sensor and ignition plug must be very carefully cleaned.

– Note: To avoid damage to the electric ignition do not use it when the burners are not in

place.

Correct Positioning of the Burners (Auxiliary, Semi-rapid and Rapid burners)

– It is very important to check that the burner ﬂame spreader “F” and the cap “C” have been correctly

positioned (see ﬁgs. 7 and 8). Failure to do so can cause serious problems.

Fig. 7

Ignitor “S”

Sensor “T”

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sem comentários

CDA HG9320 Manual de Serviço Página 8