CDA DV 710 Especificações descarregar pdf (Página 27)

Installation "A" between Existing Side Cabinets (560 or 600 mm GAP)

(ﬁgs. 24, 25, 26, 28)

– Mount the 2 (two) metal supports “B” (supplied with the

appliance in a separate kit) as indicated in Figs. 25 or 28).

– Fig. 28 only - prepare 2 wood uprights “A” (width 20-50

mm, thickness 18 mm, length 650 mm); mount the 2 wood

uprights “A” to the cabinet walls as indicated in ﬁgure.

– Build in the double oven making it slide on the metal

supports “B”.

Installation "B" between Side Cabinets by

Removing Provious Housing (ﬁgs. 27, 28)

– Remove previous housing.

– Mount the 2 (two) metal supports “B” (supplied with the

appliance in a separate kit) as indicated in Fig. 28.

– Prepare 2 wood uprights “A” (width 20-50 mm, thickness 18

mm, length 650 mm); mount the 2 wood uprights “A” to the

cabinet walls as indicated in ﬁgure.

– Build in the double oven making it slide on the metal

supports “B”.

544

538

718

595

560

WARNING !

VERY IMPORTANT

The underside of the

cabinet shall be

opened to allow

correct air circulation.

720 min

(

)

Support base

570 min

Fig. 25

(*) Measure calculated from the

underneath of the worktop to the top

support base of the “B” supports.

560 mm Gap

Installation “A”

Fig. 24

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Sem comentários

CDA DV 710 Especificações Página 27