CDA PC44 Instruções de Operação Página 82

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 81
4·26
Operating Instructions
Programming Stitch
(continued)
PIN 1
08
389A
57·28 1/93
Determining Stitch Bead Length
This setting defines
the
length
of
each
st
itch bead that
wi
ll be deposited
during each
st
itched duration. You can set the length from 0 to 1.023
seconds per bead.
Similar
to
setting % values, selecting a very small stitch bead value will
result in an almost continuous bead and may exceed the mechanical
response time capabilities
of
the gun and solenoid. Depending
on
how
large a stitch bead value is selected, you may have only one bead
deposited during any duration.
To achieve a useful stitch pattern, Nordson recommends that you begin
with a stitch bead that equals
1
15
of
the duration length (unless you
have other specific requirements). For example, a
0.500 second
duration should have
no
more than a 0.1 00 second stitch bead lengths.
Based on test patterns, you can then increase
or
decrease the bead
length to suit your application.
Entering Bead Length Values
Push Button Sequence Result
1. Press LEFT
or
RIGHT to
select a digit position.
2. Press UP (to increase the digit
va
lue) or press DOWN (to
decrease the value).
3. Repeat the steps 1 and 2 until
bead length is set
to
the value
you want.
4.
Press SET.
1. The selected digit is flashing
on
the LCD.
2. The digit value increases
or
decreases.
4.
"X" is flashing on the Stitch level.
Nordson
Corpora110n 1993
All Roghls R
esetved
Vista de página 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 103 104

Comentários a estes Manuais

Sem comentários